Another trip to Munnyworld as I take on a Rooz toy.
The Rooz is shaped like a legless kangaroo? or maybe a ghost chipmunk? And so it has proved to be the most tricky to design so far. In the end I decided to just ignore the shape completely and overlay an owl motif onto it’s odd little body.
I wanted an owl because earlier in the year Kidrobot released a limited edition 8″ dunny by Nathan Jurevicius which was one of the coolest things I’ve seen this year. It was an owl design based on a creature from Lithuanian folklore with geometric patterned eyes, soft flocked surface and wings instead of regular dunny arms. As my birthday came around Doff tried to buy one for me, but unfortunately they had sold out, so then I thought I might try to make something similar.
I didn’t want to copy NathanJ’s style too much, plus I wanted more detail so I also took inspiration from traditional/neo-traditional owl tattoo designs, especially those by Ashley Love. She does fantastic work and really has an original approach to one of tattooing’s most well worn subjects. My final product isn’t anywhere near as good as anything produced by these two artists, but I like it, and it’s the most accomplished piece of vinyl painting I’ve done so far.
For this toy I did the initial guidelines on the vinyl with a Biro, as recommended by Gangtoyz. Lines were much clearer than pencil marks and they didn’t smudge at all. I also wore latex gloves for the entire time I was painting, which seemed to make a great difference to how well the paint held onto the surface. As always, the paints used were Posca paint markers.
Thanks for looking, and you can send me suggestions for what to make next in the comments.
Very sorry but I’ve been insanely busy this week and unable to bring you an episode of Theatre of The Unconscious. I promise I’ll be back next week and you won’t want to miss the action-packed comic I’ve got planned. In the meantime I’ll give you a sneak peek of my next vinyl toy project and some pictures of cool stuff from a recent visit to the Victoria & Albert Museum, probably my favourite place in all of London. The header pic is from a sketch of Doff in samurai armour that I drew in the Japan gallery.
Always give your vinyl toys a soapy soak before working on them.
Sculpture at the entrance to the V&A.
Doff checks out a gorilla made entirely of wire coat hangers, part of the Power of Making exhibit.
Puppet theatre behind the current Annie Lennox exhibition.
I make a clay pigeon (geddit?) at the design festival.
The fifth in a series of comics detailing the slumber-time adventures of a madwoman. This week’s comic is a bit of a cheat in that it only has one panel. But I reckon it’s a pretty good panel, and it tells you the whole story. Nothing much interesting or comprehensible happens in the rest of the dream but at least I got the chance to draw one very cool image.
That’s Doff rescuing my dog, Suzie, who can be seen in the post banner above too. In-progress pics and notes on some new inking and colouring techniques after the jump.
Another Munny toy project. This time I took inspiration from Sidi Larbi Cherkaoui’s TeZukA production which I went to see a few weeks ago. I’ll most likely write about the show for my next piece but for now here’s a toy I quickly put together which took design ideas from the poster for the performance. Here’s my initial sketch.
I was trying to recreate the sketchy feel of the drawing on the actual toy so it kept a sort of rough look (plus my hands are really shaky). Keep reading to see the final result…
The fourth in the series of Doff’s dreams translated into graphical goo.
This one is a bit rougher than the last because I didn’t have too much time to spend on it but I hope you enjoyed it anyway. Below is a sketch of the beast provided by the dreamer herself, for use as reference for this episode. Note the “pumpkin” mouth.
Digging through some old memory cards and files I thought I might as well post up a few older bits and pieces in the next few weeks and so I’ll start with this one-off Dragonball Z inspired t-shirt I made for a friend’s birthday last year. A gift for Cable from the Saiyans– early pioneers and current torchbearers of the UK Parkour scene who, as you can tell from their name alone, are massively influenced by Akira Toriyama‘s famous manga and anime series.
I only have this one photo taken with my phone before I gave the shirt, so sorry for the slight blurriness.
I got to Dragonball-ize Cable for this design, including the trademark (natural) silver highlights in his hair which inspired his moniker. I also put their group name in the Dragonball lettering style and wrote Cable’s name in Japanese katakana on the back.
The drawing was done with Posca markers (yes, again, great on fabric too, they are awesome) over outlines made with tailors chalk. The shirt was finest Primark quality, cotton/polyester mix. This was the first and only t-shirt I’ve made, but I’m mulling over the idea of making a few new ones for myself.
My latest munny toy creation is a character from the longest manga I’ve managed to read in its entirety, 20th Century Boys by Naoki Urasawa. My version of the enigmatic cult leader, Friend, comes with a reversible head which displays the Friend symbol on one side and one of the creepy masks he wears on the other.
Designs were drawn directly on the vinyl with Posca paint markers with no primer. Hopefully I should be auctioning this one for charity soon too.
Apologies for the delay but finally here’s the latest episode in Doff’s dream saga. Click the comic for a larger view.
Despite spending several hours wrestling with channel settings to get the colours to come out how they looked in Photoshop, this was a fun one to make. Plenty of swiping from Mike MIgnola’s drawing style and Dave Stewart’s colouring as I tried to mimic their tone for this little story. I’ve also been reading the DC Comics Guide to Colouring and Lettering Comics by Mark Chiarello and Todd Klein which I can’t recommend enough.
Layout thumbnails, notes, and inked page after the jump.
The header image above is of Doffers getting stuck in a bootleg Pokemon kids ride, wearing her favourite wolf hat. Taking inspiration from her choice in animal headgear and her life in ballet I came up with my next design.
My next toy design came about when the Foomi figure I was looking at fell over and I noticed its spiked head looked a bit like a squid or cuttlefish’s tentacles. I was already considering a graffiti/doodle style for the toy but decided to also incorporate some cuttlefish-esque features to make it a bit more interesting if you looked at it from different angles.
Here’s the initial sketch. I simply scribbled away, drawing whatever came to mind until all the space was filled. I would have drawn straight on the vinyl but I needed to get a rough idea of spacing and what looked better. Read on to see how it turned out. Continue reading →